MIMAKI JV3-160S Guida di Configurazione Scaricare il pdf (Pagina 113)

– 5.23 –

5-3-11. ADJUST EDGE

[Function]

Size of the dead spaces on the left and right of the medium is adjusted.

Adjustment should be done to be printed on each right and left position from the both edge of

the Media.

The adjustment value will be stored under system parameter No. 3 and 2. (Left edge of the

paper = No.3, right edge of the paper = No.2)

• Because the adjustment pattern plots the drawing while detecting the medium

width, the medium of no plotting should be used during the adjustment. If the

medium which has been plotted should be used, the correct adjustment becomes

unavailable any longer.

• In this adjustment, the actual measured value is entered, but the value found from

the following formula is stored under the system parameter.

Adjustment value of the left end = 15mm - Actual measured value (mm)

(stored in increments of 0.1mm)

Adjustment value of the right end = 15mm - Actual measured value (mm)

(stored in increments of 0.1mm)

[Operation]

1) Select the ADJUSTMENT.

Press the

ENTER

key.

2) Select the “ADJUST EDGE ” pressing the

FUNCTION

key.

Press the

ENTER

key.

Medium

feeding

direction

Paper

L = 15 mm R = 15 mm

FUNCTION

# ADJUST < ENT >

# ADJUST

ADJUST EDGE < ent >

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 169 170

Nessun commento

MIMAKI JV3-160S Guida di Configurazione Pagina 113